Brief: Discover the Hidrostal Sewage Pump Mechanical Seal HI-15.87mm KB-5/8 Impeller End Mechanical Seal, designed for optimal performance in sewage pump applications. This seal ensures durability and efficiency with precise installation guidelines and high-quality materials. Perfect for industrial and commercial use.
Related Product Features:
Designed for Hidrostal sewage pumps with a 15.87mm shaft diameter.
Ensures leak-proof performance with pre-installation leakage examination.
Includes detailed installation instructions for proper setup.
Features a cartridge seal design for easy maintenance and replacement.
Requires shaft outside diameter tolerance of +-0.05mm for optimal fit.
Shaft run out must be less than 0.1mm for proper operation.
Lubrication with oil is recommended during installation.
Includes medium lead-in pipe for friction heat dissipation and seal chamber flushing.
Domande frequenti:
What are the preparation requirements for installing the Hidrostal Sewage Pump Mechanical Seal?
The shaft outside diameter must be within +-0.05mm tolerance, shaft run out less than 0.1mm, and shaft end float less than 0.13mm. Ensure no sharp edges on the shaft over the O-ring.
Can the cartridge seal be disassembled and cleaned before installation?
No, the cartridge seal is pre-cleaned and leakage examined. Disassembling or cleaning before installation may damage the seal.
What should I do if the shaft does not rotate smoothly after installation?
If the shaft does not rotate smoothly, the seal may have been improperly installed. Check the installation steps and ensure all components are correctly positioned.